2007-04-20 1 baw101... silicon switching diode ? electrically insulated high-voltage medium-speed diodes ? pb-free (rohs compliant) package 1) ? qualified according aec q101 baw101 type package configuration marking baw101 sot143 parallel jps maximum ratings at t a = 25c, unless otherwise specified parameter symbol value unit diode reverse voltage v r 300 v peak reverse voltage v rm 300 forward current i f 250 ma peak forward current i fm 500 peak forward current i fm 500 ma surge forward current, t = 1 s i fs 4.5 a non-repetitive peak surge forward current i fsm - total power dissipation t s 35c p tot 350 mw junction temperature t j 150 c storage temperature t stg -65 ... 150 1 pb-containing package may be available upon special request
2007-04-20 2 baw101... thermal resistance parameter symbol value unit junction - soldering point 1) baw101 r thjs 330 k/w electrical characteristics at t a = 25c, unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics breakdown voltage i (br) = 100 a v (br) 300 - - v reverse current v r = 250 v v r = 250 v, t a = 150 c i r - - - - 0.15 50 a forward voltage i f = 100 ma v f - - 1.3 v ac characteristics diode capacitance v r = 0 v, f = 1 mhz c t - 6 - pf reverse recovery time i f = 10 ma, i r = 10 ma, measured at i r = 1ma, r l = 100 ? t rr - 1 - s test circuit for reverse recovery time ehn00019 f d.u.t. oscillograph pulse generator: t p = 10 s, d = 0.05, t r = 0.6ns, r i = 50 ? oscillograph: r = 50 ? , t r = 0.35ns, c 1pf 1 for calculation of r thja please refer to application note thermal resistance
2007-04-20 3 baw101... reverse current i r = ? ( t a ) v r = 250v baw 101 ehb00104 max. typ. 2 10 5 10 1 4 3 5 10 10 5 r 5 na 10 0 50 100 t a ?c 150 forward voltage v f = ? ( t a ) i f = parameter -40 -20 0 20 40 60 80 100 120 c 150 t a 0.6 0.65 0.7 0.75 0.8 0.85 0.9 v 1 v f 10ma 100ma forward current i f = ? ( v f ) t a = 25c 0 1.0 2.0 baw 101 ehb00103 a v f v 5 5 -3 10 -2 10 10 -1 0 10 f forward current i f = ? ( t s ) baw101 0 15 30 45 60 75 90 105 120 c 150 t s 0 50 100 150 200 ma 300 i f
2007-04-20 4 baw101... package sot143 package outline foot print marking layout (example) standard packing reel ?180 mm = 3.000 pieces/reel reel ?330 mm = 10.000 pieces/reel rf s 2005, june date code (ym) bfp181 type code 56 pin 1 0.8 0.8 1.2 0.9 1.1 0.9 1.2 0.8 0.8 0.8 -0.05 +0.1 1.9 1.7 0.1 2.9 +0.1 -0.05 0.4 0.1 max. 12 3 4 0.25 m b 0.1 1 10? max. 0.15 min. 0.2 a m 2.4 0.15 0.2 10? max. a 1.3 0.1 0...8? 0.08...0.15 2.6 4 3.15 pin 1 8 0.2 1.15 b manufacturer
2007-04-20 5 baw101... edition 2006-02-01 published by infineon technologies ag 81726 mnchen, germany ? infineon technologies ag 2007. all rights reserved. attention please! the information given in this dokument shall in no event be regarded as a guarantee of conditions or characteristics (?beschaffenheitsgarantie?). with respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. information for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may contain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life-support devices or systems with the express written approval of infineon technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
